Battery Connectors-JST PH Series
JST PH-2
The JST PH 2.0mm battery connector is more commonly referred to in Micro RC as an MCP or MCPX connector, taking its common name from the RC product which it was first used on. However, in other electronics fields it goes by its correct name JST PH 2.0 2P. This battery connector is more robust than the popular Molex battery connector and used in RC vehicles which require a battery of 200mah and over. The connector is easily distinguishable by its pin shape which are square and also a single ridge and slot type positioning system on the top of the connector. A common example of a battery with this type of connector is shown in the images below.
| Manufacturer: | JST | Part Number: | PH-2, PHR-2, PH connector |
| Application: | Wire to Board Crimp style Connectors | Circuits(max): | 2 |
| Pitch: | 2.0mm (0.078’’) | Crimp Terminal: | SPH-002T-P0.5S, SPH-002T-P0.5L, SPH-004T-P0.5S |
| Mating wires: | UL1571 24/26/28/30/32AWG | Link: | JST PHR-2 |
| Mating Parts: | B2B-PH-K-S, S2B-PH-K-S | ||
 |
 |
 |
 |
 |
 |
JST PH-3
The dimple at the center of the contact ensures positive contract and low contact resistance battery connectors for Li-Polymer batteries at all times.
| Manufacturer: | JST | Part Number: | PH-3, PHR-3, PH connector |
| Application: | Wire to Board Crimp style Connectors | Circuits(max): | 3 |
| Pitch: | 2.0mm (0.078’’) | Crimp Terminal: | SPH-003T-P0.5S, SPH-003T-P0.5L, SPH-004T-P0.5S |
| Mating wires: | UL1571 24/26/28/30/32AWG | Link: | JST PHR-3 |
| Mating Parts: | B3B-PH-K-S, S3B-PH-K-S | ||
